Back to Water Treatment Systems
NewWater Treatment Systems
RO and EDI Water Treatment Systems
Available configurations include single-pass RO, double-pass RO, RO with EDI and standalone EDI, with product-water capacities starting at 250 L/h.
Product overview
The RO and EDI water-treatment range is used to prepare process water and purified water from a defined feed-water source. Depending on the inlet conditions and required water quality, the system can be configured as single-pass RO, double-pass RO, RO with EDI polishing, or an EDI stage within a suitable pretreatment route.
A water-treatment system is not selected by flow alone. Pretreatment, the number of RO passes and EDI polishing must be matched to the feed conditions, target quality and downstream use rather than treated as interchangeable routes.
The current records start at a nominal output of 250 L/h, while flow and water-quality performance differ by treatment route. Only confirmed model records are shown; generic figures from other suppliers are not used to complete the table.
Before selection, provide a feed-water report, target conductivity or resistivity, peak and daily demand, recovery requirement, storage and supply arrangement, and the required manual or PLC control level so the treatment route can be confirmed.
Key features
PLC and manual control options
Technical specifications
Selected modelSingle-pass RO
| Product-water Capacity | 250–10,000 L/h |
|---|---|
| Desalination Rate | 97–99 % |
| Product-water Conductivity | ≤10 μS/cm |
| Recovery Rate | 50–70 % |
| Power Supply | 380 V / 50 Hz |
Applications & configuration
Suitable applications
- Purified water for cosmetics processing
- Production-line water preparation
Service process
Service process
- 01Requirement reviewClarify the product, target capacity, process and local power conditions.
- 02Solution and configurationCheck the model, material and control configuration against the confirmed requirements.
- 03Manufacturing or stock inspectionArrange production, or verify the condition of a specific used machine.
- 04Factory testingInspect and test the equipment against the agreed acceptance items.
- 05Packing and transportConfirm packing and shipment arrangements for the equipment and destination.
- 06Installation guidanceAgree on an installation-support method based on the machine and site conditions.
- 07Commissioning and trainingConfirm commissioning and operator-training arrangements within the project scope.
- 08After-sales supportProvide follow-up support based on the specific machine, reported issue and project agreement.
Products
Related machinery
NewWater Treatment Systems
RY-OG Ozone Generator
Adjustable ozone generation equipment with a stainless-steel enclosure and air cooling, for integration with production-environment treatment and water-treatment systems. Confirm process needs, ventilation and site safety requirements before use.
NewEmulsifying Equipment
Emulsifying mixing vessel
Vessel equipment with mixing and emulsifying assemblies for liquid and paste processing. Select the configuration according to the material and process.
NewEmulsifying Equipment
Fixed Vacuum High-shear Homogenizing Emulsifier
A fixed, multi-vessel vacuum homogenizing emulsifier available in 500L, 1T, 2T, 3T and 5T sizes.
NewFilling Machines
Horizontal Liquid Filling Machine
A horizontal pneumatic liquid-filling series offering four filling ranges from 10 mL to 5,000 mL.
FAQ
Frequently asked questions
Which models are available for this equipment?
Available models include Single-pass RO, Two-pass RO, Two-pass RO + EDI, EDI polishing, Smart configuration. Final selection should also consider the product, batch or daily output and production cycle.
What product information is needed for a quotation?
Please provide the product type, viscosity, heating or cooling requirements, batch capacity and expected production cycle so the suitable model and configuration can be checked.
How are voltage and controls confirmed?
Please state the destination country, local power conditions and automation requirements. The final electrical and control configuration is confirmed in the project proposal.
Equipment enquiry
Need help confirming the right configuration?
Tell us the product, planned capacity and process requirements so we can check an equipment solution against your actual needs.